Software Downloads

STARGATE V2.38 Firmware and WinEVM Software

Files included:
SG2_38.HEX (latest firmware version)
WINEVM.EXE (latest software version SG2.38)

• Instructions

• Changes and Improvments

• Version 2.38 Details

Instructions

1. UNZIP to C:\STARGATE directory.
2. RUN FWTOOL (C:\STARGATE\FWTOOL.EXE)
3. Click FILE | OPEN then select SG2_38.HEX
4. Click LOCAL UPDATE (this will take 7-15 minutes to download)
5. Exit FWTOOL
6. Open STARGATE Winevm (Event Manager).
7. Click UTILITIES | SELF TEST then click RUN then YES to run Self Test, then OK to exit.
8. Click on the Clock icon then click READ, then SET, then DONE to exit.
9. Re-download your schedule.

For future updates: www.jdstechnologies.com

Note: Update Version 2.38 requires both firmware version SG2_38 and WinEVM software version SG2.38 to run.

Back to Top

Changes/Improvements include:

- Microprocessor Watchdog Time-out operational.
- Eliminated relay chatter when CO Line is unplugged from STARGATE
- Changed the ring qualification from the off portion of the ring to the on portion.
- Reduced the crosstalk between different audio paths.
- Increased the schedule capacity by 50%
- Increased the telephone log capacity to 200 entries
- Increased the number of flags from 64 to 256
- Increased the number of variables from 32 to 256
- Fixed the Longitude/Latitude not showing up correctly in system info.
- Added Caller ID to Telephone Output

Back to Top

VERSION 2.38 CHANGE DETAILS

WatchDog Timer

The watchdog timer in the STARGATE’s microprocessor has been enabled.
The watchdog timer will reset STARGATE if it detects a halted operating
system or system hang-up.

Flags and Variables

The number of flags have been increased from 64 to 256, variables
increased from 32 to 256. The device database will be modified the
first time version 2.38 is used. This will change the device database
size. It is not recommended to use a previous version (pre 2.38) of
WinEVM once the database has been converted.

Caller ID in Telephone Output Field

The last Caller ID message (number) can be used in the Telephone output
field. By placing the upper-case letter ‘C’ in Telephone out field,
STARGATE will replace it with the numerical contents of the Caller ID
buffer. STARGATE puts a prefix onto the CID number as shown below:

CID Header: 001 Valid number
002 Private Number
003 Unknown Number
// example : 001-619-487-8787 (valid number)
// 003-000-000-0000 (unknown number)

Back to Top

Main menu | Archives | Downloads