Mini StarGate Software
Downloads		   CD-ROM

StarGate V2.39 Firmware and WinEVM Software

Files included:
SG2_39.HEX (latest firmware version)
WinEVM.EXE (latest software version SG2.39

 

Instructions

  1. UNZIP to C:\StarGate directory.
  2. RUN FWTOOL (C:\STARGATE\FWTOOL.EXE)
  3. Click FILE | OPEN then select SG2_38.HEX
  4. Click LOCAL UPDATE (this will take 7-15 minutes to download)
  5. Exit FWTOOL
  6. Open STARGATE Winevm (Event Manager).
  7. Click UTILITIES | SELF TEST then click RUN then YES to run Self Test, then OK to exit.
  8. Click on the Clock icon then click READ, then SET, then DONE to exit.
  9. Re-download your schedule.

For future updates: www.jdstechnologies.com

Note: Update Version 2.38 requires both firmware version SG2_38 and WinEVM software version SG2.38 to run.

Back to Top

2.39 (4 June 1997)

Note: Version 2.39 update requires both version 2.39 firmware and 2.39 WinEVM software.

Changes and Improvements

Back to Top

Refer to the "Version History Details" section for details on these changes. Version 2.39 requires both firmware and software to run.

VERSION HISTORY DETAILS

VERSION 2.39 CHANGE DETAILS

THEN Macros

THEN Macros behave more like schedules with the ability to copy/cut/paste between Macros and Schedules. A THEN Macro window looks and acts like a schedule window. - More than one THEN Macro can be opened at a time. - A schedule download will save all open Macros. - Nested IF’s and calls to other THEN Macros are now enabled.

Define THEN Macro

This screen has changed to the spreadsheet style. To edit a Macro, select the name or description and press the ‘EDIT’ button. To create a new Macro, enter a name and description (optional) and press the ‘EDIT’ button. Note that a new Macro cannot be edited unless it has a name.

Editing a THEN Macro

Behaves as before and just like a schedule.

Saving a THEN Macro

A Macro can be saved by pressing the ‘Save’ button on the top button bar (the button with a diskette), or by closing the Macro window. If the Macro has been modified, you will be prompted with whether to save it or not.

Simultaneous ICM and CO Access

Prior to Version 2.39, if the ICM line was in the offhook state, the remote access function on the CO line was inoperable (it would time-out, hang up). Version 2.39 addresses this problem so the ICM line can not interfere with the operation of the CO line and remote access. However, there are still some issues that need to be understood concerning the interaction between the CO and ICM.

Version 2.39 does not support a separate ICM or CO touch-tone session. This means a user can press *1 from the CO line, and pressing a 1 on the ICM will complete the command and send out the A1-ON command with the voice response sent to the ICM (the voice is sent to the source of the last digit, in this case the ICM). A future version will support a separate ICM/CO touch-tone session.

Self Test

Self Test now restores the longitude/latitude/timezone information stored in the non-volatile memory instead of re-setting to San Diego's.

Special-time's not announcing correct

IVR-Special-time's not announcing correct time After a download, it was noted that some of the IVR-Special time fields would not properly annunciate the correct time. This has been corrected.

DTMF

Out Volume Change The volume used on DTMF Out was causing over-modulation for certain customers, it has been reduced from level 12 to level 8 (same volume levels as used in voice outputs).

Back to Top | Changes and Improvments

Home | Main menu | Downloads